Chevy GMC Pickup Truck Front Door Latch Lock Assembly

Pull the door lock assembly out and disconnect the wire harness.

Chevy GMC Pickup Truck Front Door Latch Lock Assembly Right Passenger ...

Frigidaire 131763202 Washer Door Lock Assembly

Too low to display
  • Review
  • TAG : Pull the door lock assembly out and disconnect the wire harness.
ADD TO CART
  • Second time I have ordered form E Trailer. Everything was great again. This is one of the best internet suppliers that I have ever used. I ordered door lock assemblies and the service was very fast and right on time, and great value for the price . The quality of the locks are top drawer. I did have to make an adjustment on my trailer to make them fit, but that was not the lock's fault. They matched the specifications listed exactly. My trailer is a little older and most things don't fit exactly. They work great. I would highly recommend E Trailer to anyone.

    So you have two holes here on the hinge, two holes here at the hinge, and then you'll need to mount at this point here. This does mount on to a raised portion, or raised lip, so that way once you have it mounted, you'll be able to swivel that, and drop it, and then you can raise or lower the handle out of it's location, and open up the door, and then you can swing it back in place to lock everything up tight. The diameter of this bar is going to give us a measurement of right at 1 inch. And that's going to do it for today's review of part number 305736. This is the Red Line 36 inch Lock Side Door Bar Lock Assembly. .

  • Today we'll be reviewing part number 305736. This the Red Line 36 inch Lock Side Door Bar Lock Assembly. We'll measure the overall length, you'll see that it is going to give us that 36 inch measurement. This system can be used on either the left or right hand side of the door. All you'd need to do is flip it around, and then you can still mount everything the same. No hardware is included, so keep that in mind, that you will need to purchase mounting hardware in order to get this set up correctly. Everything that you see here is included--you're going to get the bar, the hinges are already on there, the handles are already on, and then you get everything that you need to mount to the door, to lock the handle in place.

    Tilt the new oven door lock motor assembly and insert the connecting rod in the opening. Work the assembly into position and screw the door lock assembly in place.

  • Take a digital picture of the wires or mark them with numbered pieces of masking tape before removing them so you can attach the wires to the new door lock assembly the same way.

Plug the wire harness into the new door lock assembly.

This step-by-step shows how to replace the oven door lock motor assembly for a self-cleaning oven. The door lock motor assembly locks the latch to keep the oven door shut during the cleaning cycle and when the control lock-out is active. If the door isn't locking correctly, replace it with a manufacturer approved